Operational use:
with water up to 90°C | mould weight up to 600 kg |
with oil up to 150°C | mould weight up to 300 kg |
TECHNICAL DATA: | ||||
Temperature range | with water up to 90°C | with oil up to 150°C | ||
Temperature control | self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. |
|||
Heating capacity Switchable in stages |
9 kW water operation 3 / 6 |
3 kW oil operation none |
||
Cooling capacity | 35 kW at 90°C - see diagram | |||
Pump capacity Vacuum mode |
motor 0,75 kW vacuum max. 8mH2O |
|||
Filling amount | min. 5 litres, max. 7 litres | |||
Connections Medium Cooling Water |
1/2" BSP female thread 3/8" BSP male thread, inlet with water filter 3/8" BSP female thread |
|||
Dimensions (L×W×H) | 670 × 260 × 650 mm, incl. castors | |||
Weight | approx. 55 kg empty | |||
Colour | silvergrey RAL 7001 |
Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)
All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.