Water Temperature Control Units
CLASSIC Water TT-108 E 6 kW
The powerful temperature control unit CLASSIC Water TT-1548 E from our robust and time-tested CLASSIC product line is designed for operation with water and impresses with its user-friendliness and reliability.
Functions
- Self-optimizing temperature controller with temperature display
1/10°C – steps - Display in °C or °F and l/min or gal/min
- Digital flow display and monitoring
- Automatic temperature control
- Switchover for temperature control on the mould
- Heating switchable in stages
- Pressure display
- Time limited water refill
- Automatic mould drainage
- Leakstopper device – operation in pressure and vacuum mode possible
Construction method
- Submersible sealless pump made from bronze
- With two cooling systems: coil and plate heat exchangers
- Limescale free heat exchanger
- Corrosion resistant device for a long service life
- All parts in contact with water are made of stainless steel or bronze
- Unit on castors
Safety devices
- Level control for dry run protection
- Electronic temperature limitation and monitoring in the controller
- Mechanical safety thermostats
- Visual and acoustic fault indications
- Integrated circuit breakers
- Main switch, transformer and motor protection switch
Controller
Standard controller MP-888
The MP-888 is a digital temperature controller that ensures precise temperature regulation. It displays the current and target temperature, monitors the circulation of the tempering medium, and triggers an alarm in case of flow rate drop. The digital temperature controller can be operated in °F or °C and features analogue interfaces 0-5 V, 0-10 V, and 4-20 mA as standard.
Digital interface controller MP-988
The digital interface controller MP-988 is designed for the interfaces RS-485, RS-232, Current Loop 20 mA, CAN-bus, Profibus, and Profinet. These interfaces are freely accessible without additional card inserts. Also included are a temperature differential display and over 30 integrated machine protocols.